Official installation and tuning guides for Daytona Kits.
Daytona M249 Kit Installation Guide. Donor Body:. Required parts:. Hopup Assembly:. This is a Gen. 4 M249 kit that does not require a small spring to hold tension. You need either a steel barrel or a brass barrel. Simply put hopup rubber onto the bar
A&K M60/MK43 Installation Guide. Do not remove the loading spring tube. Make sure it sits properly and securely. Drill a hole at the rear of the receiver to allow the air line to go through. The airline is 6mm OD, so drilling a 7mm or wider hole is r
Community Video Guide:. 2018 New Receiver:. Older style receiver:.
1. This is the DG PKM kit for A&K AEG PKM. 2. Assemble the inner barrel group just like other DG models. 3. Line up the front brass bolt and tighten up all the setscrews. 4. Remove all AEG parts from the outer barrel except the spring and the screw,
LCT Daytona AK Installation Guide. PDF Guide:. Community Video Guide:.
LCT G3 Installation Guide. PDF Guide.
VFC M4/M27 IAR/HK416. PDF Installation Guide. Video Guide:.
Daytona G&P WOC M4 Installation Guide. PDF Guide:.
The tutorial uses a WE Raptor Body. However, all WE M4/HK416 and RA-Tech Forged WE bodies will be the same. Prepare your trigger assembly. Things you need from stock WE Body: trigger, trigger spring, brass tube and lock pin. You can perform trigger m
Prepare everything you need from a stock WE SCAR body:. Hopup rubber is inside the hopup chamber. (Knife is not included). Everything in Daytona Gun Kit:. Put trigger assembly together. This includes the trigger, sear, and brass tube. Trigger spring
WE PDW Daytona Kit Installation. 2025-02. PDF Installation Guide.
WE MSK/ACR Installation Guide. PDF Guide:.
Video Guide (Sep 2018):.
This guide aims to show you the proper way to measure where to cut on your fire selector to make the SEMI-AUTO position work. In this guide, a G&P WOC trigger box will be used. This will be 90% identical to all platforms which require fire selector m
Daytona Gun VFC Mp5 Zinc Body Installation Guide. Using VFC AEG Mp5 Die-casting Body. 1. This is the VFC AEG MP5 (Asia Ver.), with a DG kit. For this tutorial, please read the entire document before proceeding to installation.
DG L85 kit for Army / G&G L85 AEG body. Remove the 3 caps inside the body. 1. Cut the scope mount rear hole to the same height as the receiver. 2. Cut the inner top part as shown in the picture. 3. Drill a hopup hole. 4. Cut the outer barrel. Drill t
Daytona CA FAL/SA58 Installation Guide (2024-10). PDF Guide:. Video Guide (Old version):.
Daytona Gun HPA G36 Installation Guide. Daytona Gun CA G36 Full Kit. Starting from the trigger box. Put the air valve in and screw on the rear block. Drop the trigger box into the pistol grip. Don’t forget the rear receiver block. Put in the fire sel
Daytona Gun HPA SR-25 (M110 SASS) Installation Guide. Supported model: Ares M110 SASS Full Stock. All parts from the kit. Take apart the upper and lower receiver and remove all AEG parts. Keep the fire selector and mag release. Remove the stock, unsc