If a link or section is broken or doesn't yet exist, it is still being written. Please be patient. Are you struggling with an issue with either a build-in-progress or a completed build?. These guides provide troubleshooting information on a variety o

<h1 id="please-note-that-this-section-is-under-construction-and-will-be-added-to-regularly">Please note that this section is under construction, and will be added to regularly.</h1>If a link or section is broken or doesn&apos;t yet exist, it is still being written. Please be patient.<img src="https://attachments.gorgias.help/MdAV17qz4VxZWgaX/hc/kmJQz875E87adpn4/2026042917-6003e9e6-b936-4e45-9712-0d457ee4c4b9-3a1a0ae0-b028-4374-99c8-9aa3e58e3593.png" style="width: 300px;" class="fr-fic fr-dib"> Are you struggling with an issue with either a build-in-progress or a completed build?&#xA0;These guides provide troubleshooting information on a variety of the most common issues that come up when building, running, and maintaining your Daytona Gun.&#xA0;It contains more in-depth information than can be found in the general user manual.Please continue reading below for broad troubleshooting tips. Before continuing on to kit-specific troubleshooting, we strongly recommend going through these general tips.<hr> <h1 id="isPasted">General Tips</h1>These are some of the most common ways to potentially clear up issues before either delving deeper into kit-specific tips, or reaching out to DGA support for personalized assistance.&#xA0;Use a quality NON-SLP HPA tank. Tanks must NOT be SLP (Super Low Pressure). This is because airsoft HPA regulators are designed for use with a standard HPA tank and not an SLP one. This troubleshooting tip goes for any type of HPA airsoft gun, Daytona or not.Use high quality, heavyweight BBs. Using cheap and/or very light BBs may result in jams, misfeeds, and odd shot placement. Heavy BBs will, all else being equal, travel farther and more directly than lighter ones. We recommend at least 0.28g as a base weight.Use a midcap magazine. Hi-caps and drum magazines are often low quality, contributing to feeding issues. The much more variable feed pressure of various hi-caps also often results in feeding and shooting issues in DGs.Use an airsoft regulator that is, A) high refresh rate and B) single QD (quick detach). Low refresh regulators will struggle to keep up with air demands, especially in full auto. Dual QD regulators can sometimes starve the system of air, again especially in full auto.Regularly clean, lubricate, and maintain your build. Check all hardware for tightness, and use blue thread lock on all of it.

Troubleshooting Introduction & General Tips

Some help for feeding issues regardless of kit used.

Feeding Issues General Troubleshooting

Troubleshooting specific to DGA builds installed into the WE M4/4168/888 system.

WE M4/4168/888

Troubleshooting specific to A&K M249 builds. Applies to all models.

A&K M249

Troubleshooting articles for builds based on the LCT AK series.

LCT AK

Check here for help on dealing with nothing happening on a trigger pull.

Dead Trigger

Muzzle Energy/Low FPS/Low MPS Issues

WE MSK

Finding and fixes air leaks across all kits.

Leaking Issues General Troubleshooting

Tips to solve issues during the build process across all or most kits.

Build Issues General Troubleshooting

Contact us if you have any questions regarding Daytona Airsoft Systems.

To Daytona Youtube Channel

To Daytona Facebook Page

To Daytona Discussion Group

To DGA Main Site

DGA Support

Troubleshooting common issues with general tips as well as kit-specific help.