Daytona Airsoft Support logo
Daytona Airsoft Support logo

All collections

Supported Donor Guns (Jan 2022)

Supported Models

Below is a list of the kits and bodies they are designed forOthers are certainly possible but will require cost to machine and custom design. For the easiest, no-hassle builds please use the donor bodies listed below. Even those will require some modification.

1. LCT AK and RPK series AEG Bodies. Can fit in E&L AKs with modification on receivers and an outer barrel with the rear threaded (14x1mm). As-Val, VSS, PP-19 or SR-3 (non-standard AK receiver) series won't work. 

Status: Back in production Late Q1 2022


2. WE GBBR M4 / 888 / Raptor, can work with RA-tech forged receivers with modification (no AEG bodies).

Status: in production


3. VFC M27 IAR / HK416D / M4 GBBR. 416C will not work unless you change to full-length buffer. 416A5 work with modification on existing hopup unit (no AEG bodies).

Status: in production


4. G&P WOC / Western Arms (WA) spec GBBR M4. No AEG bodies. Functional bolt catch available. Can work in most Western Arms spec bodies with modification.

Status: in production


5. FAL / SA58 (Echo1, CA FAL, or Matrix bodies; ARES bodies NOT supported).

Status: in production


6. M249 / MK46 (A&K, CA or Echo1). Will not fit G&P bodies.

Status: in production


7. M240 (A&K / Matrix / Golden Eagle Bodies).

Status: in production


8. M60 / MK43 (Designed for A&K M60 / MK43 bodies and their variants) Will not work with ARES bodies.

Status: in production


9. PKM (Designed for A&K Echo1 Body, works with Raptor PKP with modification).

Status: in production


10. CA G36 (Classic Army AEG G36C / E / K Body). S&T / ARES bodies require far too much work for what it's worth.

Status: in production


11. WE SCAR-L / MK16 GBBR body only.

Status: in production


12. WE GBBR SCAR-H / MK17 GBBR body only.

Status: in production


13. WE MSK / ACR GBBR body only.

Status: in production


14. WE / EMG KAC PDW GBBR body only.

Status: in production


15. G&G L85A2 / AFV or Army R85 / 86 Body (Does not work in ICS or WE body).

Status: in production


16. VFC Die-Casting AEG MP5 Body.

Status:  Back in production Late Q1 2022


17. VFC HK417 uses VFC HK417 / G28 GBBR body only.

Status: in production


New R&D?

1. LCT G3 kit (uses LCT AEG G3 body).

Status: under development, no release date.



What kind of Daytona Guns has been discontinued?

UZI 

(No).

SRC MP5 (steel body)  

Discontinued due to SRC manufacturing consistency issues. However, the VFC AEG MP5 kit is available.

KA Galil 

(Limited tun) discontinued.

G&G M14 

(Scrapped due to bolt issues).

ASG AUG 

(Problematic trigger design).

ARES KAC M110 SASS 

(Temporarily discontinued due to lack of donor body).

VFC Stamped Steel AEG MP5 Body

(Temporarily discontinued due to lack of donor body).

Was this article helpful?
Yes
No
Powered by